Promo code 9.9 Shopping Fest. (18-20 Sep 19)
Thermaltake Pacific 12mm-10mm Hard Tube Bending Kit
รหัสสินค้า  202461010

Thermaltake Pacific 12mm-10mm Hard Tube Bending Kit

รหัสสินค้า  202461010
  • Various Mandrels for Stylish Bending
  • Clean and Precise Cut
  • Versatile Installation
  • Tt LCS Certified
ราคาพิเศษ:  ฿ 2,700

ราคานี้ใช้ได้ตั้งแต่  05/02/2018 - 19/09/2019
รวมยอดของ
- +
มีสินค้าในสต๊อก
สินค้านี้จำกัดจำนวนในการสั่งซื้อ
รับประกันศูนย์ 1 ปี
ส่งฟรีที่เซเว่นอีเลฟเว่น
ของแท้ 100%

สินค้าแนะนำสำหรับคุณ

Packaging Dimension (W x L x H) 1.2 x 1.2 x 0.8 cm
Weight Detail 0.2 kg

Thermaltake Pacific 12mm-10mm Hard Tube Bending Kit

ชื่อแบรนด์ : Thermaltake

รุ่น : Pacific 12mm 10mm Hard Tube Kit

ขนาดสินค้า : 1.2 x 1.2 x 0.8 cm

น้ำหนักสินค้า : 0.2 kg

การรับประกัน : 1 Year (นับจากวันที่ซื้อสินค้า) /รับประกันภายในประเทศ

 

Thermaltake Pacific Hard Tube Bending Kit for ID 10mm x OD 12mm Hard Tube

The new hard tube bending tools offered by Thermaltake are especially designed for ID 10mm x OD 12mm hard tube and provide everything makers needed when considering loop planning. Available in various angles, the laser-marked mandrels are made from solid aluminum and are anodized for maximum durability. In addition, the cutter and reamer guarantee a by eliminating all the hassles during the modding process.

 

Various Mandrels for Stylish Bending

Made from solid aluminum and anodized for maximum durability, the mandrels feature polished center line channels that help to maintain the tubes’ round shapes while bending. Bending angles can be chosen from 45°, 90°, 180°, and 360°.

 

Clean and Precise Cut

The cutter can support 1/8” (3 mm) to 1 and 1/4” (32 mm) hard tube and allows users to make perfectly square end cuts. The internal and external reamer is designed to deburr the inner diameter and the outer diameter of the extruded hard tubing. With a silicon cord, kinking is prevented when bending the tube.

 

Pictures above are for reference only.

Versatile Installation

Designed for ID 10 mm x OD 12mm hard tube, the Pacific Hard Tube Bender Kit allows makers to construct aesthetically superior water cooling systems by allocating the tubes and radiators to each particular component and incorporating externally-modular upgrades into their chassis.

 

Caution

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.

Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.

It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.

Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

 

Thermaltake recommends the following steps to be taken after completing your water loop setup

It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.

Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.

DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately

Fill the reservoir to the top as it will prevent air from going into the pump

If necessary tilt the system slightly from side to side to bleed the air out of the loop.

Place some paper towels under fittings and joining points to test for leaks.

Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop

Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.

Coolant might fade over time.

 

P/N

- CL-W153-AL00BU-A

Compatibility

- ID 10mm x OD 12mm hard tube

Material

- Mandrels :Aluminum

- Cord:Silicone

- Reamer:Plastic + Steel

Kit Contents

- 45° & 90° Mandrels x 1

- 180° Mandrels x 1

- 360° Mandrels x 1

- Cutter x 1

- Silicone cord x 1 

- Inside-outside Reamer x 1

 

* Specifications are subject to change without notice.

* The product picture(s) is only for your reference, it may differ from the actual product.

 

Call Center / ช่องทางการรับประกัน

433 ถนนสุคนธสวัสดิ์ แขวงลาดพร้าว เขตลาดพร้าว กรุงเทพฯ 10230

โทรศัพท์ + 66(0) 2553 - 8899 / แฟกซ์ + 66(0) 2578 - 8195

(รายละเอียดศูนย์บริการเพิ่มเติม)

ผู้ที่ดูสินค้านี้ มักจะดูสินค้านี้ด้วย

ความเห็นเกี่ยวกับสินค้า (จากทั้งหมด 0 คน)
ภาพรวมความพึงพอใจ
0
0
0
0
0
ความเห็นของลูกค้าเฉลี่ย
ยอดรวม  ยังไม่มีการประเมิน